ISO Standard Pneumatic Rubber Fender 3.3 X 1.5

3.3 X 1.5 ISO Standard High Quality Pneumatic Rubber Fender

Pneumatic rubber fender

Pneumatic rubber fender introduction
Progress and development of ship technology, and has to continuously cope with progressively larger oil tankers such as VLCC's, ULCC's, large gas carriers, bulk carriers and floating structures.
Floating pneumatic fenders are used world wide for ship-to-ship (STS) transfer operations, terminals, and for all kinds of ships.
Since its creation until today, Henger more than 10,000 fenders have been supplied worldwide both for ship-to-ship and ship-to-dock operations serving our valuable customers.These fenders play a critical role in the safe operation of ship berthing and mooring.
Pneumatic Rubber Fender Features
1.Available in a variety of sizes , Diameters ranging from 500 mm to 4500 mm and length ranging from 500 mm to 12000 mm
2.Many kinds of color ,Black , Milky white , Warship Level Gray , Orange Red , Blue
3.Contructed with an inner rubber layer,reinforcing cord layers and outer rubber layer
4.Comprehensively tested for material and hydrostatic pressure irregularities
Pneumatic Rubber Fender Application
1. Oil and gas tankers
2. Fast ferries and aluminum vessels
3. Temporary and permanent installations
4. Rapid response and emergencies
5. In ports with extreme tidal variations
6. For ship-to-ship lightering operations
7. For all navy vessels due to low hull pressure and the advantage of a proportional increase of reaction force and energy absorption
Pneumatic Rubber Fender Transportation
Transportation We can take the deflation pallet transportation and the entire fender transportation without deflation according to the requirements of customers. We always put the customer's requirements first.

When the Pneumatic rubber fender is not used for a long time, it should be washed and dried, filled with appropriate compressed air, placed in a dry, cool, ventilated place.Inventory temperature is maintained at -15 ℃ -40 ℃ . ; The place where the fender is stored should be kept away from the heat source. ; Fenders shall not be in contact with acids, alkalis, greases and organic solvents. ; When the fenders are not in use, they must not be stacked and should not be stacked on the ba. In order to better extend the service life of pneumatic rubber fenders, it is recommended that you store them in strict accordance with the above recommendations.

ISO Standard Pneumatic Rubber Fender

Pneumatic Rubber Fender 3.3 X 1.5

Natural Rubber Pneumatic Marine Fenders

ISO Standard Pneumatic Rubber Fender 3.3 X 1.5 Images